The 200ULT is a complete dual-channel wireless system that consists of the 200UPR receiver and two 10BT transmitters. The new 200UPR receiver allows the use of two wireless transmitters at the same time. It features twin-antennas, a 3.5mm -64dbB 2-channel mic level output jack, two recessed On/Off switches, two Power On/ Signal Received LED and 2 sets of channel selectors to set the desired frequency for each receiver. Using crystal-control and PLL synthesis the 200UPR operates for better than 8 hours on 6 "AA" batteries. The receiver comes with a "hot-shoe" mount, a 2-channel 3.5mm to 3.5mm output cable and a 2-channel 3.5mm to twin XLR cable. Also included are two 10BT body-pack transmitters supplied with Azden EX-503 omni-directional lapel microphones and metal belt-clips. In addition to the 3.5mm mic input jack the transmitter has a Power On switch with an associated LED a separate Standby switch for audio muting and a set of channel selector switches. The 10BT runs better than 8 hours on a single 9V battery.
Features of the Azden 200ULT include:
Dual 63-Channel On-Camera UHF Wireless Bodypack System
Frequency Range: UHF 63-Channel Selectable (793.750 – 805.875MHz)
Type of Reception: 2 Channel Receiver
Oscillator: PLL Synthesized
RF Squelch Level: 13dBµV
Frequency Response: 50Hz – 15kHz
S/N Ratio: >70dB “A” Weighted
Audio Distortion: <1% @ 1kHz
Operating Temp: 0°C – 45°C (32°F – 113°F)
MIC Out: -64dBm @ 600 W - 3.5mm Mini-Jack
Power Requirement: 6 – 1.5V “AA” Alkaline Batteries or 12VDC @ 200mA - 6 – 8 Hours
Dimensions:105W x 105H x 35D mm (4.13W x 4.13H x 1.38D inches)
Weight: Approx. 490g Including Batteries (17.28oz)
Azden 200ULT Consumer Reviews
(0 reviews)
Write a review of the Azden 200ULT!
Please share your experiences to help other people choose the product that's best for
them. This is a review site, not a forum, so please don't just ask questions. Please
do not use swear words or offensive language, and please, no advertising!
No reviews yet.
The 200ULT is a complete dual-channel wireless system that consists of the 200UPR receiver and two 10BT transmitters. The new 200UPR receiver allows the use of two wireless transmitters at the same time. It features twin-antennas, a 3.5mm -64dbB 2-channel mic level output jack, two recessed On/Off switches, two Power On/ Signal Received LED and 2 sets of channel selectors to set the desired frequency for each receiver. Using crystal-control and PLL synthesis the 200UPR operates for better than 8 hours on 6 "AA" batteries. The receiver comes with a "hot-shoe" mount, a 2-channel 3.5mm to 3.5mm output cable and a 2-channel 3.5mm to twin XLR cable. Also included are two 10BT body-pack transmitters supplied with Azden EX-503 omni-directional lapel microphones and metal belt-clips. In addition to the 3.5mm mic input jack the transmitter has a Power On switch with an associated LED a separate Standby switch for audio muting and a set of channel selector switches. The 10BT runs better than 8 hours on a single 9V battery.